• On sale!
zoom_in
keyboard_arrow_down

EasyPrint PLA Value Pack Standard 4x500g (Total 2kg) 1.75mm (White, Black, Red, Blue)

£59.90
£49.90 Save £10.00
Tax included

With EasyPrint filament your success rate will be much higher!

Quantity
check In Stock

 

 

 

EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.

Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.

EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.

Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.

EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.

  • Full weight!

On every spool of EasyPrint you will have a perfect spooled filament with a weight of 500g, 1 kg or 3 kg depending on what your needs are. When you compare price and performance EasyPrint is hard to beat!

  • Wide Temperature span

Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°

  • Perfect diameter tolerance

EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging

  • Continuously monitored

During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm

  • Perfect spooling

When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.

  • Non-toxic and biodegradable

EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.

  • Length indicator on spool

Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.

  • EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
  • EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
  • EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.

Technical data

Physical Test method Value
Density GB/T1033-1986 1.25 g/cm3
Melting Point GB/T19466.3-2004 175 - 179° C
Glass transition temperature GB/T19466.3-2004 60 - 62° C
     
Mechanical    
Tensile strenght @ Yield GB/T1040-1992  63 MPa
Elongation @ Break GB/T1040-1992  6 %
Flexural Strenght GB/T1040-1992  92 MPa
Izod Impact Strenght GB/T1040-1992  3,5 KJ/m2

Notify me when available

Data sheet

Manufacturer
PrimaCreator
Weight
0.5kg
Filament Diameter
1.75mm
Material
PLA
Diameter Tolerance
±0.02 mm
Printing Temperature
185~220°C

You May Also Like..